High speed series marine diesel generator set

Remark:
I.Definition of power:
Primary power of the generator set
1.The average load rate exceeding 24 hours of running does not exceed 70%. 2.Within every 12h, with an overload by 10%, the engine can run for 1h. 3.The annual running time does not exceed 3000h.
Continuous power of the generator set:
1.The annual running time is not limited. 2.Run under constant 100% load. 3.The capacity of 10% overload.
II.The requirements of power matching:
1.For ship types with annual running time exceeding 3000h or large impact load, such as seine fishing with light, refrigerating, rake and prick, floating crane, sand suction boat and wind power installation, the model shall be selected according to the continuous power of the generator set.
2.For ship types such as inland river transport ships, coastal fishing boats and high-speed boats with domestic electricity or auxiliary pumps as the main load, the model can be selected according to the normal power of the generator set.
III.Dimensions and weight are for reference only For specific product parameters and generator set model selection, please make specific docking with relevant personnel.
Ⅳ. The delivery date of products marked with * shall be subject to the reply of the manufacturer. Product parameters and model portfolio are for reference only. Please contact relevant personnel for official information on delivery time and fishing boat model portfolio.

Notes:
1. Power definition:
Normal power of the unit:
1. The average load rate in 24 hours of operation does not exceed 70%.
2. Within every 12 hours, it can be operated at an overload of 10% for 1 hour.
3. There is no limit on the annual operating time.
Continuous power of the unit:
1. It is allowed to operate at a constant 100% load.
2. Within every 12 hours, it can be operated at an overload of 10% for 1 hour.
3. There is no limit on the annual operating time.
2. Power matching requirements:
1. For ocean-going fishing vessels with an annual operating time of more than 3,000 hours, it is required to match or select according to the continuous power.
2. Inland transport ships, coastal fishing vessels, high-speed boats and other ship types with domestic electricity or auxiliary pumps as the main load can be matched or selected according to the common power.
3. For light-induced fish, rake fishing vessels and floating cranes, sand suction vessels, and lifting engineering vessels, it is recommended to connect with the application department in advance before selection.
3. Product power description:
1. The common power and continuous power values ​​of CW200 series, CW250 series, WH620 series, WH20 series, WH25 series, and WH28 series are the same.
2. High-speed series, WHM6160 series, 170 series, and WH17 series are divided into common power and continuous power.
4. Dimensions and weights are for reference only.
5. The delivery date of the series or diesel engine models marked with * is subject to the specific needs of the project and the manufacturer’s reply.